hydraulic BOM full-auto shaping and curing machine

full-auto shapping and curing hydraulic curing machine is the best curing machine MAIN SPECIFICATION

1.1.  KINDS OF TYRES:                     M/C,S/C,L/T

1.2.  SIZE:                                 8”-21”

1.3.  HEIGHT OF GREEN TYRE;              460mm

1.4.  CURING PRESS TYPE:                  hydraulic vertical motion frame syle

1.5.  MOLD CLAMPING FORCE:              MAX 103T

1.6.  DIA OF HOT PLATE:                    900mm

1.7.  HOT PLATE WORKING PRESSURE:   MAX 1.0Mpa(or according to clent’s demand)

1.8.  NOS. OF MOULD:                      4 pcs.

1.9.  HEIGHT OF MOULD:                   MIN100mm

1.10.              DAYLIGHT:                           MAX 1000mm

1.11.              TIME OF OPEN/CLAMP             18-22s

1.12.              DIA OF CYLINDER:                250mm

1.13.              DIA OF PISTON ROD               180mm

1.14.              MAX WORKING PRESSURE OF CYLINDER:

                                          21Mpa

1.15.              CENTER MECHANISM

1.15.1. BLADER TYPE:                   B type

1.15.2. MATERIAL OF CYLINDER:         SUS304

1.15.3. SCREW OF CLAMPING TRANSFER RING:

                                       TW95*4/cog-7e

1.15.4. ID OF CYLINDER                  63mm

1.15.5. DIA OF PISTON ROD/TRAVEL:      35mm/300mm

1.15.6. CYLINDER WORKING PRESSURE:  2.0-2.5Mpa

1.15.7. CYLINDER OF UNDER-RING DIA/TRAVEL:

                                       125mm/200mm

1.15.8.  CYLINDER OF UNDER-RING WORKING PRESSURE:

                                              0.6-0.8Mpa

  1.16.BLADER SHAPING TYPE:                 two stage shaping

  1.17. INTERNAL PRESSURE THEMAL PIPS SYSTEM

      According to the client’s demand, the medium could be steam or superheated water.

      The pipes could be two sets(two moulds use one set) or four sets(each mould use one set)

  1.18. HYDRAULIC SYSTEM

      1.18.1. LOW FUEL PUMP

          1.18.1.1. TYPE:                        low nose vane pump.

          1.18.1.2. THEORETICAL FLOWING CAPACITY:

                                               116ml/r

          1.18.1.3. MAX WORKING PRESSURE:    16Mpa

          1.18.1.4. USE REAL PRESSURE:          2.0-5.0Mpa

      1.18.2. HIGH FUEL PUMP

          1.18.1.1. TYPE:                        low nose vane pump.

          1.18.1.2. THEORETICAL FLOWING CAPACITY:

                                               10ml/r

          1.18.1.3. MAX WORKING PRESSURE:    31.5Mpa

          1.18.1.4. USE REAL PRESSURE:          ≤21Mpa

      1.18.3. MOTOR:                           15KW, 1460rpm. Double output axis

  1.19. SIZE OF MOULD SETUP

      1.19.1. PATRIX: M16 bolt. 360, 460,530,710, spreading as 90°

      1.19.2 COUNTERDIE: “T” STYLE groove jointing as 90°

2. COMPONENT

  2.1. ELECTRIC COMPONENT:

     MOTOR: CHINESE BRAND.

     PLC, TOUCH SCREEN ADOPTED MITSUBISHI.

  2.2. VALVE,ZZYP ADOPTED CHINESE PRODUCTS.

  2.3. AIR PIPES: AIR COMPONENT ADOPTED AIRTAC

  2.4. HYDRAULIC PARTS ADOPTED YUKEN.

3. PAINT: according to client’s demand.     

hydraulic BOM full-auto shaping and curing machine